Installation Instructions V1.4 - Sekstant Gateway | Page 4 7. Instructions For Installing The Sekstant Gateway The Sekstant gateway should be mounted on the communication plate. For SCI this is to the right of the controller cabinet and for SCU it is to the left of the condenser fan. 1. Power on the unit. 2. Update the controller software to the latest version, or minimum 356_04. 3. Ensure that the container ID in the controller is correct. 4. Turn the unit off and disconnect AC power. Open the controller cabinet and disconnect any modems no longer required. Both power and communication connections. 5. Mount the battery pack (item 2) in the preferred bay with the 2 securing nuts (item 3). If another device is mounted there then it is possible to mount the battery pack in the next bay to the left, directly next to the controller. 6. Remove the controller battery pack connector from the controller terminal X3. Important! Mount the green connector from the Sekstant battery pack (item 2) into controller terminal X3 instead. The controller battery pack can be removed entirely, or left in its place, but must not be connected to anything.
Download PDF file