Date: 5 May 2020 5. Display text Star Cool logo in the start-up display has been updated. It has been observed that on some user panels with earlier controller software, that Tset is unable to be set lower than -3°C. This is now corrected. FC firmware update 1.10 has been added enabling the FC to do a self-test. The FC self-test can be selected and executed in the Service menu, line S01 Manual operation, M11 FC selftest: J01 Start self-test J02 Last run date J03 Last run time J04 Status J05 Result J06 Start deny reason J07 Failure code 6. PTI/CA/ACT The 0°C step is removed in PTI and the +13°C step is removed in the CA PTI. Defrost will only be carried out in the -18°C step if needed. PTI execution time optimized if LPM200 (power meas) is mounted. Vacuum pump oil level check during PTI, if ambient temperature is above +10°C. Updated the expansion valve test during ITI and Function test (FT). Updated temperature sensor test step 2100. USDA sensor calibration limits now ±0.3°C. 7. Star View Please note it is necessary to update the StarView program to the latest version, in order to be able to read all the events and alarms, otherwise it will show “unknown” with the event/alarm number in the log. Updating the program can be done by opening your StarView program and clicking on “Help”. Here your will find “Check for updates”. Click on this and the latest version 3.22.263.0 will be installed. The latest version includes: Reading of newly implemented alarms in the controller software 357. Updates in the USDA sensor calibration steps and CT reports. Updates to the graph view. If you have any questions, please contact your Star Cool Service manager or send an email to: service@starcool.com Bjerndrupvej 47 • 6360 Tinglev, Denmark • CVR/SE no.: 13 82 37 74 www.mcicontainers.com • service@starcool.com • +45 7364 3400
Download PDF file